Load Consolidation
Use Load Consolidation to combine compatible LTL and partial shipments into optimized manifests. Consolidating shipments can help improve trailer utilization, reduce loaded miles, lower transportation costs, and create more efficient routes. The same consolidation workflow works for both LTL and partial shipments, despite the fact they have slightly different engine modes.
Table of Contents
Load Consolidation is not a base optimization model. If you feel your organization needs load consolidation, please contact your Customer Success Manager.
Key Use Cases
- Consolidate LTL loads into manifests through origin and destination sort locations
- Combine partial loads into one multi-stop truckload
- Cap manifest size by trailer capacity, number of loads, legs and days
- Limit circuitous routing and long waits at stops
- Control how the engine scores candidate manifests with a cost per mile
Navigation Overview
Open Engine > Engine Mode in the left menu. In the middle panel, select a mode under LTL Consolidation or Partial Consolidation to view its parameters on the right. Choose Edit to change them.
Consolidation Mode Types
LTL Consolidation groups LTL loads into a manifest using origin and destination sort locations. It builds consolidation, line-haul and deconsolidation manifests, with line-haul legs and implied first- and final-mile distribution.
Partial Consolidation is modeled as trailer consolidation. It combines 2–5 partial loads into one multi-stop truckload, with soft limits on commodity, region and stop count.
Mode Management
- Create a new mode: select +, choose LTL Consolidation or Partial Consolidation, and optionally copy parameters from an existing mode
- Edit: open a mode and select Edit
- Duplicate or delete: use the ⋮ menu beside the mode
Engine Mode Parameters
Example values are the ones shown in the default modes. Some parameters apply to both algorithms; Partial has additional parameters for combining loads.
|
Name |
LTL |
Partial |
|---|---|---|
|
Trailer Capacity Limits |
Yes |
Yes |
|
Default Load Capacity |
Yes |
Yes |
|
Maximum Days per Manifest |
Yes |
Yes |
|
Maximum Wait Time at Stops |
Yes |
Yes |
|
Enable Load Count Limit per Manifest |
Yes |
Yes |
|
Maximum Legs per Manifest |
Yes |
Yes |
|
Enable Circuitry Limit for Manifest |
Yes |
Yes |
|
Maximum Circuitry Limit Ratio |
Yes |
Yes |
|
Cost per Mile |
Yes |
Yes |
|
Adhere to Location Operating Hours |
Yes |
Yes |
|
Use Cubic Feet for Volume |
Yes |
Yes |
|
Maximize Consolidated Loads |
No |
Yes |
|
Maximum Partial Loads per Manifest |
No |
Yes |
|
Enable Partial Load's Stop Count Limit per Manifest |
No |
Yes |
|
Minimum Distance Savings for Load Combination |
No |
Yes |
|
Maximum Distance Ratio for Load Combination |
No |
Yes |
|
Pickup & Delivery Proximity |
No |
Yes |
LTL Consolidation
|
Name |
Description |
Example Values |
|---|---|---|
|
Trailer Capacity Limits |
Max allowable capacity of a trailer in terms of weight, volume, and pallets. |
45,000 lbs, 3,000 ft³, 31 pallets |
|
Default Load Capacity |
Fallback capacity for loads when trailer-specific data is unavailable. |
15,000 lbs, 1,000 ft³, 10 pallets |
|
Maximum Days per Manifest |
Maximum duration (in days) allowed to complete all stops in a manifest. |
5 days |
|
Maximum Wait Time at Stops |
Max time a driver can dwell at a stop while waiting for service. |
24 hours |
|
Enable Load Count Limit per Manifest |
Enables a hard cap on number of loads in a manifest. |
No |
|
Maximum Legs per Manifest |
Max number of distinct stops (legs) allowed per manifest. |
3 |
|
Enable Circuitry Limit for Manifest |
Enforces a ratio of total mileage to straight-line distance. |
Yes |
|
Maximum Circuitry Limit Ratio |
Max ratio of manifest mileage to straight-line mileage. |
1.6 |
|
Cost per Mile |
The cost used by the optimization engine per mile when scoring solutions. |
$3 / mile |
|
Adhere to Location Operating Hours |
Whether to honor site hours for pickups/deliveries. |
No |
|
Use Cubic Feet for Volume |
If true, volume is evaluated in cubic feet (vs. pallet count). |
Yes |
Partial Consolidation
|
Name |
Description |
Example Values |
|---|---|---|
|
Trailer Capacity Limits |
Maximum trailer capacity for weight, volume, and pallets. |
45,000 lbs, 3,000 ft³, 31 pallets |
|
Default Load Capacity |
Default fallback when trailer-specific capacity is not available. |
15,000 lbs, 1,000 ft³, 10 pallets |
|
Maximum Days per Manifest |
Maximum duration (in days) for completing the full manifest. |
5 days |
|
Maximize Consolidated Loads |
Prioritizes load count in a manifest over minimizing cost. |
No |
|
Maximum Partial Loads per Manifest |
Maximum partial loads allowed in a single manifest (excludes first/last shipper limits). |
3 |
|
Enable Partial Load's Stop Count Limit per Manifest |
Enables a limit on the number of distinct stops. |
No |
|
Maximum Wait Time at Stops |
Maximum dwell time at any stop in the trip. |
24 hours |
|
Enable Load Count Limit per Manifest |
Enables a max number of loads allowed in one manifest. |
No |
|
Maximum Legs per Manifest |
Maximum number of stops/legs per manifest. |
3 |
|
Minimum Distance Savings for Load Combination |
Minimum route savings (in miles) needed to justify consolidation. |
100 miles |
|
Maximum Distance Ratio for Load Combination |
Max ratio of consolidated mileage to direct mileage. |
0.9 |
|
Pickup & Delivery Proximity |
Max distance between pickup and dropoff for a partial load. |
1,000,000 miles (default unconstrained) |
|
Enable Circuitry Limit for Manifest |
Enables routing efficiency constraint using Circuitry Ratio. |
Yes |
|
Maximum Circuitry Limit Ratio |
Max allowed ratio of manifest mileage to straight-line mileage. |
1.6 |
|
Cost per Mile |
Value used by engine to calculate cost of candidate manifests. |
$3 / mile |
|
Adhere to Location Operating Hours |
If enabled, only selects loads that comply with location time windows. |
No |
|
Use Cubic Feet for Volume |
If true, uses cubic feet instead of pallet count for volume handling. |
Yes |
Data Dictionary
|
Name |
Description |
Data Type |
|---|---|---|
|
Trailer Capacity Limits |
Max trailer weight, volume and pallets |
Number |
|
Default Load Capacity |
Fallback weight, volume and pallets for a load |
Number |
|
Maximum Days per Manifest |
Longest time allowed to complete all stops in a manifest |
Integer |
|
Maximum Wait Time at Stops |
Longest dwell allowed at a stop (hrs) |
Number |
|
Enable Load Count Limit per Manifest |
Turn on a hard cap on loads per manifest |
Boolean |
|
Maximum Legs per Manifest |
Most distinct stops (legs) in one manifest |
Integer |
|
Enable Circuitry Limit for Manifest |
Turn on the route-vs-straight-line mileage limit |
Boolean |
|
Maximum Circuitry Limit Ratio |
Highest manifest-to-straight-line mileage ratio |
Decimal |
|
Cost per Mile |
Cost per mile used to score candidate manifests |
Currency |
|
Adhere to Location Operating Hours |
Only plan stops inside site operating hours |
Boolean |
|
Use Cubic Feet for Volume |
Measure volume in cubic feet instead of pallet count |
Boolean |
|
Maximize Consolidated Loads |
Favor more loads per manifest over lower cost (Partial only) |
Boolean |
|
Maximum Partial Loads per Manifest |
Most partial loads in one manifest (Partial only) |
Integer |
|
Enable Partial Load's Stop Count Limit per Manifest |
Turn on a limit on distinct stops (Partial only) |
Boolean |
|
Minimum Distance Savings for Load Combination |
Miles a combination must save to be worth making (Partial only) |
Number |
|
Maximum Distance Ratio for Load Combination |
Highest ratio of combined miles to direct miles (Partial only) |
Decimal |
|
Pickup & Delivery Proximity |
Maximum distance between a partial load's pickup and delivery (Partial only) |
Number |